The weight of your feet will be supported by the joists and floorboards on the floor that you can walk on. If you’re building a new home, you’ll want to make sure you have a floor plan in mind before you start building. If you don’t know what your floor plans look like, take a look at our Floor Plans page.
Table of Contents
Can my attic support my weight?
If you’re talking about the floor of an attic, then it may or may not support the weight of a person. We will show you how to figure it out. It is highly likely that the attic will not support your weight if you are walking on the roof. First of all, you need to know what kind of attic you have.
If it’s a big attic and you don’t have a good idea of how big it is, the best thing to do is to go to your local building department and ask them. They’ll probably be able to give you a rough estimate of the size of your home. You might also want to check with your insurance company to see if they’ll cover you in the event that you get injured in an accident while walking in your own attic.
Is it OK to put flooring over blown in insulation?
Place flooring over insulation to make your attic space functional. Most of the attics are covered with batting or blown insulation. If blown-in insulation is used, control the height or thickness of the layers so boards can be laid over top without having to remove the insulation from the attic.
If you have a large attic, you may want to consider adding a second floor to your home. This will allow you to add additional rooms to the home, such as a laundry room, kitchen, or even a guest room.
Can attic joists support a floor?
If the joists are larger, they might support attic flooring, but the only reliable way to know for sure is to have a structural engineer take a look at your attic support system. It’s important that an engineer be involved in the design of your new home in some cases because larger joists will not support a new living area.
Can you walk on insulation board?
Please note however that you can’t walk, or store heavy goods, on top of ceiling level insulation; for this, we advise installing insulation at the rafters.
Is it OK to put plywood in the attic?
An attic can be floored with 1/2″ CDX plywood, if it is being used only for storage. If you are planning on using the space as a living space, you can’t the same thing. In that case, you will need to use thick plywood. OSB can be used as an alternative. If the attic is used as storage space, it should be at least 3 feet wide and 6 feet long.
It should also have a minimum of 2 feet of clearance between the ceiling and the floor. If you plan on installing a ceiling fan in your attic, make sure that the fan is installed in such a way that it will not interfere with the installation of your ceiling fans.
How much weight will attic hold?
An attic can hold 10 lbs per square foot. The attic is the best place for when you want to utilize space in your house and they are specifically designed to hold storage, but they can even be used for storage of other things.
If you are looking for a storage solution for your attic, then you have come to the right place. We have a large selection of attic storage solutions for you to choose from. You will find a wide variety of options to fit your needs and budget.
How much weight can attic joists hold?
Ceiling joists for dead loads are usually designed to carry 10 pounds per square foot, as opposed to the 40 or 50 p sf recommended for live loads. The reason for this is that the joist is designed as a load-carrying member, not a live load member.
However, if you are designing a floor that will be used for both live and live-load loads, then you will need to consider the difference between the two loads in your design. You would need a ceiling height of 8 feet (2.1 m) and a wall thickness of 2 inches (5.4 mm).
If you were to use the 2-inch-thick (6.5 mm) ceiling, you would have to add an additional 2 feet to your floor area to accommodate the additional load.
