Whether you’re climbing up, coming down, or standing on a ladder, always maintain three points of contact with it, either two hands or two feet. If you have a rope, use it to hold yourself up. If you don’t have one, tie a knot in the rope and hang from it. This will keep you from falling off the ladder or falling into the water.
Table of Contents
How many points of contact should be kept when climbing an articulated ladder select the best answer?
Three points of contact can be used: one hand and two feet, or two hands and one foot. There are five. A rope or cord should be used to tie off the extension ladder at the upper landing surface. The ladder must not be used for any purpose other than as a means of egress.
No person shall use a ladder to ascend or descend a stairway. A ladder shall be kept in good repair. Ladders must be maintained in a clean and sanitary condition.
Any person who violates any provision of this section is guilty of a misdemeanor punishable by a fine not to exceed one thousand dollars ($1,000) or by imprisonment in the county jail for not more than thirty (30) days. L. 93: Entire article amended with relocations, p. ANNOTATION Law reviews. For article, “Ladders and Ladder Safety“, see 24 Colo. Law.
Annotator’s notes.
How many points is a contact on a ladder?
Maintaining three points of contact is required to use ladders safely. Two hands and one foot or two feet and one hand is what it means. Ladders should not be used in areas where there is a risk of falling objects, such as under bridges, overpasses, or on the side of the road.
If you must use a ladder, make sure it is sturdy enough to support the weight of your weight and that it can be easily removed from the ground when you are done using it.
When using an articulated ladder in the scaffolding configuration the height of the scaffolding should not exceed?
The height should not be more than three times the width of the bottom support. Working heights should be limited to no more than one foot above the floor. If the height of a table is greater than the maximum height allowed by the building code, the table must be designed to comply with the minimum height requirements for the type of work it is to be used for.
For example, a two-story office building with a maximum floor area of 2,000 square feet may not be permitted to have a three-foot-high table in its workroom. The table height may be reduced to a minimum of two feet above floor level in order to provide adequate space for workstations and other equipment. A table that is too high or too low for its intended use is not permitted.
What is a articulating ladder?
An Articulated Ladder is a portable ladder with one or more pairs of locking hinges which allow the ladder to be set up in a variety of configurations such as a single or extension ladder, a double ladder or a triple ladder.
When climbing or descending it is acceptable to?
Always, when climbing up or down, face the stepladder. Between the side rails, keep your body centered. To maintain three-point contact, keep two hands and one foot, or two feet and a hand, in contact with the side rail. When descending, keep one hand on the edge of the rail and the other hand in front of you. If you have a rope, use it to hold yourself in place as you descend.
Do you need 3 points of contact on a step ladder?
Two hands and a foot, or two feet and a hand, should be maintained when climbing or descending a ladder. Climb up/down the ladder if you stay near the middle of the ladder. A barricade can be used to keep traffic away from the ladder. Ladders should be kept free of obstructions. Ladders should not be used as a means of entry into a building.
Ladders are not intended for use in confined spaces such as stairwells, hallways, lobbies, elevators, etc. They are intended to provide access to areas that are inaccessible by other means (e.g., stairs, ramps, elevator shafts). If you are unsure whether an area is accessible, check with the building owner or manager to see if the area has an accessible route to the nearest accessible stairway or elevator.
How many points of contact must you have with a ladder while climbing it quizlet?
At least three points of contact should be maintained during the climb. Have a minimum of two feet and one hand or two hands and one foot in contact with the ground at all times. Keep your head up and your eyes on the road.
Do not look down or to the side. If you do, you may lose your balance and fall. You may also lose control of your vehicle and crash into a tree or other object.
How many rungs should you leave at the top of a ladder?
Both feet should be on the same rung or step throughout the task. You should not work off the top three rungs. Do not leave ladders or staircases unattended. If you are using a ladder, make sure that it is securely fastened to the wall or floor.
If you use a stairway, ensure that there are no gaps between the steps and the floor or wall. Ensure that the stairs are at least three feet (1.2 m) above the ground and that they are not more than six inches (15.4 cm) from the edge of the work surface.
Make sure there is a clear path for the worker to reach the ladder. The ladder should not be used as a means of access to a work area. It should be kept out of reach of children and other workers who may be in the area at the time of work.
Which of the following ladder safety guidelines are correct?
If you face the ladder, use both hands to climb and descend. The ladder should be kept with three limbs on it. Carry tools in a tool belt or use a hand line to raise and lower them. Don’t reach too far with the other hand, and always hold on with one hand.
If you have a rope, use it. If you don’t, tie a knot in the rope and carry it with you. You can also use a carabiner to fasten it to your harness.
