The thermostat needs to be in the off position. While holding the + button, press and hold the On/Off Mode button until the light turns off. If you are using an older model, you will need to remove the battery and replace it with a new one.
Table of Contents
How do I reset my Dometic 5 button thermostat?
buttons. The buttons had been held down. MODE button again. Hold the button down for a few seconds, then release it. Repeat this process until you have reached the desired temperature. If you are using a thermometer, you will need to hold down the temperature UP button for several seconds before releasing it, and then hold it down again to start the timer.
How do I reset my Dometic dual zone thermostat?
Most of the problems will be solved if you reset your thermostat. If you are using an electric heater, you may need to turn the heater off and then on again to get the temperature to the desired level. If you have a gas heater you can turn it on and off, but it may take a few minutes for the gas to heat up.
What does E4 mean on Dometic thermostat?
“E4” refers to the freeze sensor located in the air conditioner on the roof of your RV. The control module box at the front of the air conditioner unit has two wires that connect to the freeze sensor. You can get an “E4” error if this 2-pin connector is loose. If you have an E4 error, you will need to replace the sensor with a new one.
How do I know if my Dometic thermostat is bad?
RV’s thermostat may be bad if it has a blank screen or is not responding to temperature adjustments. Changing your thermostat’s batteries, running tests with a multimeter, or responding to error codes are all ways to get the system running again. It may be necessary to replace it if not.
RV has an air conditioner, it may not be able to keep the temperature at the desired level. You may have to turn it off and on a few times a day to get it to work properly.
What does E7 mean on a Dometic thermostat?
Turn everything back on and see if the unplugged shore cord works. If it doesn’t work, try plugging the cord back in and try again. If the problem persists, you may need to contact your local power company for assistance.
How do I change my thermostat from Celsius to Fahrenheit on Airxcel?
Hold the mode button down for 5 seconds. The temperature of the thermostat can be changed from fahrenheit to celsius. Pressing the button again will return to normal mode. If you are using an older version of Windows, you will need to download and install the Windows 8.1 update.
How do I reset my Dometic CFX?
Reset to factory settings by using reset function on fridge. Press “SET” 5 times (single compartment models), or 6 times (two compartment models), then press/hold the “+” button for at least 5 seconds. “rES” will appear in display. If you do not have a reset button on your fridge, you will need to press and hold the “-” button to reset the settings.
Where is the reset button on an RV AC?
The location of the reset button varies from model to model, but it’s usually easy to find. The “reset” button is located on the back of the unit. The reset button is on the inside of the unit. The power button is usually behind the button.
What does E5 mean on Dometic thermostat?
The open circuit or out of range freeze sensor is used. The mode of operation of the air conditioning unit will be locked. The unit is not equipped with an on/off switch. It will automatically turn off when the power is turned off and will remain off until you turn the ignition key to the On position.